•        The 2nd Automotive Plastic Products R&D and Manufacturing Technology Conference
Organizers: Shanghai Youshi Business Consulting Co., Ltd
             Chinese Automotive Conference Net  http:www.made.com,cn
Executive:  Jia Ding Youshi Exhibition Service Center
Date:May.28-29.2010                         Add:Shanghai, China (Pending)

Section Forums
2010 Automotive Interior & Exterior Products and New Materials Application Seminar
2010 Automotive Rubber and Plastic Technology Development and Application Seminar
The 2nd Automotive Body Design and New Material Application Seminar
Compounded Materials and High-Performance Materials Application Seminar in Automotive Industry

1、Big business opportunity
Along with the economic development and the expanding of marketing requirement, Automotive plastic industry owns more and more wider developing space, Automotive plastic take about 30% ratio on the whole plastic products. The high-speed developing automotive industry forecast will exceed Germany in 2010, Then the developing speed of automotive plastic products and its mould will be higher than other places. In the coming few years, The requirement related with auto will go up and exceed 50%, The international market`s requirement for Chinese products will be the very important part.
“2010 Automotive Interior & Exterior Products and New Materials Application Seminar” held at the same period will be the largest scale science discussion conference. The former conference successfully held at Wu Hu attract about four hundred and fifty representatives and many famous companies take part in and gained a high praise.

2、Communication content and attendees
1) This communication conference will talk about “Standardization of automotive plastic products”、“Trend of automotive products be plastic”、“Progress of design technology for plastic products”、“Design and innovation for plastic mould”、“Development and application for modified plastic”series of topics and invite some experts to share their opinions and experience about the construction elements which include manufacturing process and design system and adjustment level and price like that. It will be the first science communication event specially focus on the R&D of plastic products. No-distance touch with those international experts will benefit to you!
2)Who will attend:General manager、R&D Director、Technical manager、plant manager、Product manager、purchase manager from automotive whole-vehicle plant and plastic components manufacturers and raw-materials and equipments suppliers, and the senior technical experts from institutes and universities and guild
3) Partial communication content:
Development and application and extend for CAE technology in China
How to improve the using efficiency of raw-material of plastic product
Developing trend of plastic mould and the choice and application for its manufacturing equipments
Extend and apply the high-speed and high-precision process technology & develop or manufacture its equipments  
The available solution to shorten the production cycle time of plastic mould
New molding process and quick but economic developing technology for plastic products
Import-Export status for plastic products and how to increase localization
Familiar problem and solution for automotive plastic components
Globalization procurement trend and how to face
Application and developing trend for modified plastics

3、Charge(Registration deadline: May.19.2010)
  A   Registration Fee: RMB1,900 per head, Including conference materials & lunch & tea break, RMB1,500 per head if you payoff before Jan.31.2010, RMB2,500 per head for whose register out of deadline ;
B. Show`s charge
RMB4,800/2M2 (Only one display table w/h two chairs);
RMB9,800/9 M2 (Professional setup, VIP booth);
10% additional charge if you choose the booth places, First come first serve
Please delivery your detail information to us for our post the invitation on time.
Bank information:
Company Name:  Jia Ding Youshi Exhibition Service Center
Account Number: 32451008080028808
Bank Name:Cheng Qiao Branch, Shanghai Country Commercial Bank

4、Exhibition Scope
Automotive bumper、chair、panel Assembly、steering wheel and its jacket、dynamo、mould and plastic module、inside cover (door interior decoration、top interior decoration、column interior decoration、side interior decoration etc…) 、Polyammonia ester materials、normal materials (plastic ABS、modified PP、leather、flock、foam、glass steel、engineering plastic、composite materials etc…)、special materials、interior & exterior design solution(clay model、data model and model mold sample)、automotive carpet (fast foot)、sunproof and decoration、hub cover、carbody decoration、fur veins、process(injection molding、slush、vacuum suction plastic、blow molding、PU foam、compressing heat、envelop、spray、plating、weld etc…)、interior decoration security and green developing technique、tester、decoration color、volatile treatment technique、gasoline tank、rapid prototypes making technique、orientation and fasteners system and other involved systems.

5、Paper collects and published
We will invite some top designers and process or materials experts to share their opinions and the latest progress for interior & exterior products in the quick-growing automotive industry. Now, Any papers with high-quality or with connotation and novelty will be collected then published in national formal publications.
Paper abstract must be released before Feb.28.2010 at latest
The final paper should be released before April.30.2010 at latest
The final speech should be released before May.15.2010 at latest
Paper requirement
(1) Abstract must include one of above mentioned topics, simple but clear, as the soul of paper;  
(2) Abstract will be limited into 150-200 words and the key technology can benefit attendees;
(3) Paper should be with exact data and smooth letter but limited within six thousand works;
(4) Please save your file with .doc and A4 standard file form, the margin for every side must be left 30mm and don`t keep the print page in the file;
(5) List clearly your refer literatures and the first author instruction and contact information after the text;
(6) Paper must be written by yourself and without any commercial use, Any articles with sales trend will be rejected;
Abstract review and approved process:
A professional team constructed by the seniors technical engineers will review your paper abstract based on attached standard:
　 ● Topic accord with the current trend
　 ● Own the practicality value and advanced opinions
　 ● Instruct and guidance for work of attendees
Any accepted paper abstract will be notify to the author for your go ahead and we will delivery the file form to you
How to delivery your paper:
Papers abstract can be sent to e-mail address ejohn@online.sh.cn and call us for confirmation if received or
not, Further questions, Please contact with the organizers.

Contact with
Mr John Deng（Cell phone# 13801949747）
Tel:86(21) 33518744,33518477            Fax:86(21) 6290 4313            
E-mail:ejohn@online.sh.cn      
Website: http://www.made.com.cn

Former Lecturers (No order in list)
Liu Neng Quan    Director of Interior& Exterior Dept, Technical center of SAIC Group
Cao Du           Director and chief of engineer, Interior& Exterior technical committee of Chery Group
Zhou Jian Jun    Supervisor engineer of Interior dept and project manager of project management dept, Shanghai Launch Technical Automotive Center
Song Dao Gui      Manager of Interior& Exterior dept, Shanghai Engineering Institute of Changan Group
Chen Qing Dong   Vice director of Interior& Exterior technical committee, Chery Group
Jiang Mei         Secretary-general of automotive non-metal material branch, SAE-China
He Li Ping        Professor of Automotive body advanced design and manufacture National Key Laboratory(Hu Nan University)
Ren Qi Long       Super-chief of engineer, Futian Auto
Li Xiao Lei        Director of software development dept, DaikyoNishikawa (Shanghai) Software Technologies Co., Ltd
Li Zhong Bing     Minister of material dept and Director of automotive engineering institute materials technical committee, Chery Group
Tang Rui Lin      Vice chief of engineer, Faw Haima Motor Co., Ltd
Ge Yue           Marketing manager of China, QPC
Chen Shi Ping     Technical manager of Asia-Pacific Area, Basel
Liu Jun           Johnson Controls, Inc.
Li Yong Hua       Engineer of KINGFA SCI.&TECH. Co., Ltd
Wang Wei Guang   Interior &Exterior Dept, Technical center of SAIC Motor Company
Xin Min Qi        Shanghai Kumhosunny
Li Luo Xing       Professor of Material and engineering academy, Hu Nan University
Li Wu Fan        Shanghai SICAR Vehicle Technology Development Co., Ltd.
Ma Zhen Hua     General manager of China, Creaform Shanghai Ltd.
Jin Sun           Professor and vice director of Shanghai digital automotive body engineering key laboratory
Shen Jian Dong   Body and Exterior Director, Pan Asia Technical Automotive Center Co., Ltd
Lu Pei Ji         Product consulting director of Leeport & Co.
Zhu Wen Ye      General manager of Wuxi city, China Auto Logistics Equipment Factory, Yongda Group
Hu Zheng Nan    Technical Director of Shanghai Launch Technical Automotive Center
Xu Ji Guang      Director of Technical centre, Jiangsu Baihe Coating Co., Ltd
Zhou Guang Ya   Technical director of Shan Dong Zou Ping Automobile Material Co., Ltd
Tang Zhi Feng    Manager of Body dept, Magna Steyr China
Lei Yu Cheng     Chairman of the board and CEO, TJ INNOVA Engineering & Technology Co,. Ltd
Zhou Ming       Sales manager of ASI DataMyte (Shanghai) Trading Co., Ltd
Wang Yan Wen   Vice general manager of Shanghai SICAR Vehicle Technology Development Co., Ltd.
Nie Chun        General manager of DaikyoNishikawa (Shanghai) Software Technologies Co., Ltd
Wang Hui        Technical director of Asia-Pacific Area, Germany Benteler Automotive Industrial Company
Dong Hai Lin     Marketing director of CCA Company
Yang Yang       Sales manager of China, Geomagic
Tian Ya Mei      General manager of China Auto Parts & Accessories Corp./China Auto parts Plastic Developing Centre  
Zhang Tao      Vice president of Shanghai SICAR Vehicle Technology Development Co., Ltd.
Chen Min Jun   General manager of Shanghai branch of Haitian Group
Tao Yong Hua   General manager of Zhe Jiang Tao Shi Mould Group
Lu Yu Liang     Senior engineer and manager of Design Dept in Technical centre, Ningbo Xin Tai Machinery Co., Ltd
Zhang Feng     Manager of Design and Sculpt Dept in Technical Centre, Yanfeng Visteon
Feng Bing      Technical vice president of Suzhou Wanda Automobile Interior Decoration Factory
Zhang Bin      Vice president of PUSH Die & Mold Co., Ltd, Yibin Push Group Co.,Ltd.
Wang Qing Guo   Senior engineer and director of Non-metal branch dept of technical centre, FAW
Qian Zhou Zhong  Technical director, Jiangyin Mould Plastic Group
Xie Xian Hua      Developing manager, Ningbo Inoac Huaxiang Automobile Products Co., Ltd
Cui Chun Lin      Sales manager of Hanwha Shanghai
Zhang Jun Hua   Manager of Chemical and engineering section of Material dept, Automotive engineering institute, Chery Group
Zhou Zhao Feng   Sales Developing Manager of China, Henkel
Zhang Shu Li     Technical Centre of SAIC Group
Shen Qi Zhong    Xinyi Automobil Components (Wuhu) Ltd.
Pang Jing         Autoliv, Shanghai Vehicle Safety Syst. Co. Ltd
Tu Shao Ping      Chery Group
Fang Gen Ming    Passengers Vehicle Company, of SAIC Group
Zhang Da Wei     Shanghai SICAR Vehicle Technology Development Co., Ltd.
Wang Guo Ling    Sales developing director of Shun Pu Company
Xia Yong        Automotive Engineering Academy of Tsing Hua University, Automobile Safety and Energy-saving State Key Laboratory
Zhou Jia         Materials and Engineering Academy, Hu Nan University
Shi Rong Bo     Manager of Non-metal branch, Material dept of Automotive Research Institute, Chery Group
Luo Ming Hua    R&D engineer of Shanghai Kumhosunny Plastic Co., Ltd
Shan Xiao Ying   R&D Manager of Polyurethane Automobile Centre, BASF Asia-Pacific Area
Zhang Ying      Manager of Application and Development Dept, Shanghai PRET Composites Co., Ltd.
Wu Sheng Jun   Director, Plastic field of Non-Metal Section dept, Material dept of Automotive Research Institute, Chery Group
Chen Wei        Passengers Vehicle Company, of SAIC Group
Zhang Heng      China Chief of representative, America Q-Lab company
Fei Shi Lin        Assistant of sales manager, Industrial Products of East-China area, X-Rite
Vincent Nijzink，  General manager in China, EAS  Europe  B.V.
Fred Fischer，    Product manager of Stratasys U.S.A
Todd Fortner，    CEO of Chang Shu Interior company
Dr. Karsten Brast，Vice president, Project and Engineering Director, SAS Automotive Systems Co., Ltd
Frans Vandenbosch   Foreign expert specially hired by TJ INNOVA, High management for Interior in famous International group
Michael Crewdson   America Q-Lab Company
Dhiraj Uikey        Shun Pu Group
Roland.van.Giesen  Global Marketing Technology Manager of STAMAX
Rolf Balte          Asia Acoustics Director of HP Pelzer Automotive Interior Systems (Taicang) Co.，Ltd.
•        Item url:http://www.made.com.cn/english/2009/0902/content_36.htm

•        The 2nd Automotive Plastic Products R&D and Manufacturing Technology Conference
Organizers: Shanghai Youshi Business Consulting Co., Ltd
             Chinese Automotive Conference Net  http:www.made.com,cn
Executive:  Jia Ding Youshi Exhibition Service Center
Date:May.28-29.2010                         Add:Shanghai, China (Pending)

Section Forums
2010 Automotive Interior & Exterior Products and New Materials Application Seminar
2010 Automotive Rubber and Plastic Technology Development and Application Seminar
The 2nd Automotive Body Design and New Material Application Seminar
Compounded Materials and High-Performance Materials Application Seminar in Automotive Industry

1、Big business opportunity
Along with the economic development and the expanding of marketing requirement, Automotive plastic industry owns more and more wider developing space, Automotive plastic take about 30% ratio on the whole plastic products. The high-speed developing automotive industry forecast will exceed Germany in 2010, Then the developing speed of automotive plastic products and its mould will be higher than other places. In the coming few years, The requirement related with auto will go up and exceed 50%, The international market`s requirement for Chinese products will be the very important part.
“2010 Automotive Interior & Exterior Products and New Materials Application Seminar” held at the same period will be the largest scale science discussion conference. The former conference successfully held at Wu Hu attract about four hundred and fifty representatives and many famous companies take part in and gained a high praise.

2、Communication content and attendees
1) This communication conference will talk about “Standardization of automotive plastic products”、“Trend of automotive products be plastic”、“Progress of design technology for plastic products”、“Design and innovation for plastic mould”、“Development and application for modified plastic”series of topics and invite some experts to share their opinions and experience about the construction elements which include manufacturing process and design system and adjustment level and price like that. It will be the first science communication event specially focus on the R&D of plastic products. No-distance touch with those international experts will benefit to you!
2)Who will attend:General manager、R&D Director、Technical manager、plant manager、Product manager、purchase manager from automotive whole-vehicle plant and plastic components manufacturers and raw-materials and equipments suppliers, and the senior technical experts from institutes and universities and guild
3) Partial communication content:
Development and application and extend for CAE technology in China
How to improve the using efficiency of raw-material of plastic product
Developing trend of plastic mould and the choice and application for its manufacturing equipments
Extend and apply the high-speed and high-precision process technology & develop or manufacture its equipments  
The available solution to shorten the production cycle time of plastic mould
New molding process and quick but economic developing technology for plastic products
Import-Export status for plastic products and how to increase localization
Familiar problem and solution for automotive plastic components
Globalization procurement trend and how to face
Application and developing trend for modified plastics

3、Charge(Registration deadline: May.19.2010)
  A   Registration Fee: RMB1,900 per head, Including conference materials & lunch & tea break, RMB1,500 per head if you payoff before Jan.31.2010, RMB2,500 per head for whose register out of deadline ;
B. Show`s charge
RMB4,800/2M2 (Only one display table w/h two chairs);
RMB9,800/9 M2 (Professional setup, VIP booth);
10% additional charge if you choose the booth places, First come first serve
Please delivery your detail information to us for our post the invitation on time.
Bank information:
Company Name:  Jia Ding Youshi Exhibition Service Center
Account Number: 32451008080028808
Bank Name:Cheng Qiao Branch, Shanghai Country Commercial Bank

4、Exhibition Scope
Automotive bumper、chair、panel Assembly、steering wheel and its jacket、dynamo、mould and plastic module、inside cover (door interior decoration、top interior decoration、column interior decoration、side interior decoration etc…) 、Polyammonia ester materials、normal materials (plastic ABS、modified PP、leather、flock、foam、glass steel、engineering plastic、composite materials etc…)、special materials、interior & exterior design solution(clay model、data model and model mold sample)、automotive carpet (fast foot)、sunproof and decoration、hub cover、carbody decoration、fur veins、process(injection molding、slush、vacuum suction plastic、blow molding、PU foam、compressing heat、envelop、spray、plating、weld etc…)、interior decoration security and green developing technique、tester、decoration color、volatile treatment technique、gasoline tank、rapid prototypes making technique、orientation and fasteners system and other involved systems.

5、Paper collects and published
We will invite some top designers and process or materials experts to share their opinions and the latest progress for interior & exterior products in the quick-growing automotive industry. Now, Any papers with high-quality or with connotation and novelty will be collected then published in national formal publications.
Paper abstract must be released before Feb.28.2010 at latest
The final paper should be released before April.30.2010 at latest
The final speech should be released before May.15.2010 at latest
Paper requirement
(1) Abstract must include one of above mentioned topics, simple but clear, as the soul of paper;  
(2) Abstract will be limited into 150-200 words and the key technology can benefit attendees;
(3) Paper should be with exact data and smooth letter but limited within six thousand works;
(4) Please save your file with .doc and A4 standard file form, the margin for every side must be left 30mm and don`t keep the print page in the file;
(5) List clearly your refer literatures and the first author instruction and contact information after the text;
(6) Paper must be written by yourself and without any commercial use, Any articles with sales trend will be rejected;
Abstract review and approved process:
A professional team constructed by the seniors technical engineers will review your paper abstract based on attached standard:
　 ● Topic accord with the current trend
　 ● Own the practicality value and advanced opinions
　 ● Instruct and guidance for work of attendees
Any accepted paper abstract will be notify to the author for your go ahead and we will delivery the file form to you
How to delivery your paper:
Papers abstract can be sent to e-mail address ejohn@online.sh.cn and call us for confirmation if received or
not, Further questions, Please contact with the organizers.

Contact with
Mr John Deng（Cell phone# 13801949747）
Tel:86(21) 33518744,33518477            Fax:86(21) 6290 4313            
E-mail:ejohn@online.sh.cn      
Website: http://www.made.com.cn

Former Lecturers (No order in list)
Liu Neng Quan    Director of Interior& Exterior Dept, Technical center of SAIC Group
Cao Du           Director and chief of engineer, Interior& Exterior technical committee of Chery Group
Zhou Jian Jun    Supervisor engineer of Interior dept and project manager of project management dept, Shanghai Launch Technical Automotive Center
Song Dao Gui      Manager of Interior& Exterior dept, Shanghai Engineering Institute of Changan Group
Chen Qing Dong   Vice director of Interior& Exterior technical committee, Chery Group
Jiang Mei         Secretary-general of automotive non-metal material branch, SAE-China
He Li Ping        Professor of Automotive body advanced design and manufacture National Key Laboratory(Hu Nan University)
Ren Qi Long       Super-chief of engineer, Futian Auto
Li Xiao Lei        Director of software development dept, DaikyoNishikawa (Shanghai) Software Technologies Co., Ltd
Li Zhong Bing     Minister of material dept and Director of automotive engineering institute materials technical committee, Chery Group
Tang Rui Lin      Vice chief of engineer, Faw Haima Motor Co., Ltd
Ge Yue           Marketing manager of China, QPC
Chen Shi Ping     Technical manager of Asia-Pacific Area, Basel
Liu Jun           Johnson Controls, Inc.
Li Yong Hua       Engineer of KINGFA SCI.&TECH. Co., Ltd
Wang Wei Guang   Interior &Exterior Dept, Technical center of SAIC Motor Company
Xin Min Qi        Shanghai Kumhosunny
Li Luo Xing       Professor of Material and engineering academy, Hu Nan University
Li Wu Fan        Shanghai SICAR Vehicle Technology Development Co., Ltd.
Ma Zhen Hua     General manager of China, Creaform Shanghai Ltd.
Jin Sun           Professor and vice director of Shanghai digital automotive body engineering key laboratory
Shen Jian Dong   Body and Exterior Director, Pan Asia Technical Automotive Center Co., Ltd
Lu Pei Ji         Product consulting director of Leeport & Co.
Zhu Wen Ye      General manager of Wuxi city, China Auto Logistics Equipment Factory, Yongda Group
Hu Zheng Nan    Technical Director of Shanghai Launch Technical Automotive Center
Xu Ji Guang      Director of Technical centre, Jiangsu Baihe Coating Co., Ltd
Zhou Guang Ya   Technical director of Shan Dong Zou Ping Automobile Material Co., Ltd
Tang Zhi Feng    Manager of Body dept, Magna Steyr China
Lei Yu Cheng     Chairman of the board and CEO, TJ INNOVA Engineering & Technology Co,. Ltd
Zhou Ming       Sales manager of ASI DataMyte (Shanghai) Trading Co., Ltd
Wang Yan Wen   Vice general manager of Shanghai SICAR Vehicle Technology Development Co., Ltd.
Nie Chun        General manager of DaikyoNishikawa (Shanghai) Software Technologies Co., Ltd
Wang Hui        Technical director of Asia-Pacific Area, Germany Benteler Automotive Industrial Company
Dong Hai Lin     Marketing director of CCA Company
Yang Yang       Sales manager of China, Geomagic
Tian Ya Mei      General manager of China Auto Parts & Accessories Corp./China Auto parts Plastic Developing Centre  
Zhang Tao      Vice president of Shanghai SICAR Vehicle Technology Development Co., Ltd.
Chen Min Jun   General manager of Shanghai branch of Haitian Group
Tao Yong Hua   General manager of Zhe Jiang Tao Shi Mould Group
Lu Yu Liang     Senior engineer and manager of Design Dept in Technical centre, Ningbo Xin Tai Machinery Co., Ltd
Zhang Feng     Manager of Design and Sculpt Dept in Technical Centre, Yanfeng Visteon
Feng Bing      Technical vice president of Suzhou Wanda Automobile Interior Decoration Factory
Zhang Bin      Vice president of PUSH Die & Mold Co., Ltd, Yibin Push Group Co.,Ltd.
Wang Qing Guo   Senior engineer and director of Non-metal branch dept of technical centre, FAW
Qian Zhou Zhong  Technical director, Jiangyin Mould Plastic Group
Xie Xian Hua      Developing manager, Ningbo Inoac Huaxiang Automobile Products Co., Ltd
Cui Chun Lin      Sales manager of Hanwha Shanghai
Zhang Jun Hua   Manager of Chemical and engineering section of Material dept, Automotive engineering institute, Chery Group
Zhou Zhao Feng   Sales Developing Manager of China, Henkel
Zhang Shu Li     Technical Centre of SAIC Group
Shen Qi Zhong    Xinyi Automobil Components (Wuhu) Ltd.
Pang Jing         Autoliv, Shanghai Vehicle Safety Syst. Co. Ltd
Tu Shao Ping      Chery Group
Fang Gen Ming    Passengers Vehicle Company, of SAIC Group
Zhang Da Wei     Shanghai SICAR Vehicle Technology Development Co., Ltd.
Wang Guo Ling    Sales developing director of Shun Pu Company
Xia Yong        Automotive Engineering Academy of Tsing Hua University, Automobile Safety and Energy-saving State Key Laboratory
Zhou Jia         Materials and Engineering Academy, Hu Nan University
Shi Rong Bo     Manager of Non-metal branch, Material dept of Automotive Research Institute, Chery Group
Luo Ming Hua    R&D engineer of Shanghai Kumhosunny Plastic Co., Ltd
Shan Xiao Ying   R&D Manager of Polyurethane Automobile Centre, BASF Asia-Pacific Area
Zhang Ying      Manager of Application and Development Dept, Shanghai PRET Composites Co., Ltd.
Wu Sheng Jun   Director, Plastic field of Non-Metal Section dept, Material dept of Automotive Research Institute, Chery Group
Chen Wei        Passengers Vehicle Company, of SAIC Group
Zhang Heng      China Chief of representative, America Q-Lab company
Fei Shi Lin        Assistant of sales manager, Industrial Products of East-China area, X-Rite
Vincent Nijzink，  General manager in China, EAS  Europe  B.V.
Fred Fischer，    Product manager of Stratasys U.S.A
Todd Fortner，    CEO of Chang Shu Interior company
Dr. Karsten Brast，Vice president, Project and Engineering Director, SAS Automotive Systems Co., Ltd
Frans Vandenbosch   Foreign expert specially hired by TJ INNOVA, High management for Interior in famous International group
Michael Crewdson   America Q-Lab Company
Dhiraj Uikey        Shun Pu Group
Roland.van.Giesen  Global Marketing Technology Manager of STAMAX
Rolf Balte          Asia Acoustics Director of HP Pelzer Automotive Interior Systems (Taicang) Co.，Ltd.
•        Item url:http://www.made.com.cn/english/2009/0902/content_36.htm